号数 ばね論文集46号(2001年)
ページ数 pp.13-17
種類 論文
論文名 薄板ばね用銅合金の機械的性質に及ぼす錫ホットディップの影響
Title Influence of Tin Hot Dipping on Mechanical Properties of Copper Alloy for Flat Spring
著者 國峯 辰雄 1)・吉岡 慎一1)・山中 登2)・林 和治3)
Author Tatsuo KUNIMINE1) Shinichi YOSHIOKA1) Noburu YAMANAKA2)  Kazuharu HAYASHI3)
抄録  この報告は,銅合金の表面に新しい手法によるSnホットディップを施したものの機械的特性について調査したものである.少量のNiとSnを含む銅合金は,電気伝導性や高温特性に優れ,リレーやコネクタなどの小さなパーツのばね用に広く使われている. 本報告では,Snホットディップ材の機械的特性として,表面粗さ,ばね限界値,引張強さ,ヤング率,そして高温特性について測定した. この方法によると従来の電気めっきと比較して元の銅合金の特性を損なわない結果を得た.
Abstract In this study the effect of newly developed Sn hot dipping process for the surface coating of the copper alloys were examined. The copper alloys tested contain a small amount of Ni and Sn. They have good electrical conductivity and high temperature characteristics and, are being used widely for springs in small parts as relays and connecters. Mechanical properties of the hot dipped alloy such as the surface roughness, the spring limit, the tensile strength and Young's modulus at elevated temperatures were measured. The process resulted in much less degradation of the original Cu alloys than the conventional electroplating.
著者の所属 1)日本ベルパーツ(株) 2)(株)原田伸銅所 3)東海大学
Belonging 1)Nippon Bell Parts CO.,LTD.  2)Harada Metal Industry CO.,LTD. 3)Tokai University
Key Words Sn hot dipping , Cu-Ni-Sn alloy , Phosphor bronze , Corrosion resistance