号数 ばね論文集43号(1998年)
ページ数 pp.1-12
種類 論文
論文名 オイルテンパー線の疲れ強さに及ぼす残留オーステナイトの影響
Title Effect of Retained Austenite on Fatigue Strength of Oil Tempered Wire
著者 鎗田 博
Author Hiroshi YARITA
抄録 ばね疲労強度を目的としたオイルテンパー線の高強度化は,材料成分の高炭素化および高合金化により行われてきた。このような高強度オイルテンパー線はMs点の低下から残留オーステナイトが残存する傾向となっている。そこでこの報告は,高強度オイルテンパー線の靭性および疲労強度におよぼす残留オーステナイトの影響について調査した。その結果,
(1)残留オーステナイトを残存させたオイルテンパー線は,所定の強度を得るために必然的に低い焼戻しパラメータ値で焼戻しを行わなければならない。その結果,オイルテンパー線の靭性は低下する。したがって,残留オーステナイト量の多い試料の方が線の疲れ強さは低下する,
(2)しかしオイルテンパー線中の残留オーステナイトは,ばね成形加工やショットピーニング加工で加工誘起マルテンサイト変態を起こしばね表層硬さをより増加させることが出来る。またばね成形後の低温焼きなましにより靭性の回復が起こる。その結果,ばね疲れ強さは残留オーステナイト量の多いものが逆に高くなる。
Abstract High tensile strength of oil-tempered wire is intensely required for higher fatigue strength of coil spring. For this subject, wire has been developed in terms of increasing carbon level and/or applying high alloy of chemical composition. This study investigates the effect of retained austenite on the toughness of high tensile strength of oil tempered wire and on fatigue strength of coil spring.
The experimental results are as follows;
(1) Oil-tempered wire developed to increase retained austenite should be tempered inevitably with low value of tempering parameter in order to produce the required strength. As the results, the toughness of the oil-tempered wire is reduced.
(2) Nevertheless it is possible that the retained austenite in the oil- tempered wire is transformed into strain induce martensite by coiling spring and/or shot peening, and the surface hardness of the coil spring is induced to increase.
And also the toughness of the coil spring is induced to restore by stress relief annealing after coiling.
As the results, the fatigue strength of coiled spring with the oil-tempered wire, which contains a lot of retained austenite is higher that of coiled spring with the oil-tempered wire which contains a little of retained austenite.
著者の所属 鈴木金属工業株式会社
Belonging Suzuki Metal Industry Co., Ltd.
Key Words Retained austenite, Fatigue strength, Tempering parameter, Transformation