号数 ばね論文集42号(1997年)
ページ数 pp.31-37
種類 論文
論文名 薄板りん青銅の高温引張強度
Title Elevated Temperature Tensile Strength of Thin Sheet Phosphor bronzes
著者 国峯 辰雄1)・吉岡 慎一1)・松江 清美1)・岡部 賢2)・高島田 政紀3)
Author Tatsuo KUNIMINE1)・Shinichi YOSHIOKA1)・Kiyomi MATSUE1)・Ken OKABE2)・Masanori TAKASHIMADA3)
抄録 Sn4%,5%,6%,7%,8%,板厚0.3mmのりん青銅の高温および常温引張試験を行い,次の結果を得た。
1)高温引張における荷重‐伸び線図は,Sn含有量に関係なく,473K〜573K(低温焼鈍温度)間にセレーションが現われる。常温引張では現れない。
2)高温引張における引張強さは,623K以上ではSn含有量に依存しない。常温引張における引張強さは,723K付近からSn含有量に依存する。
3)高温引張におけるSn4%,5%の絞りは,373Kで最小値を示し,750Kで最大値を示す。Sn7%,8%の絞りは,623Kで最小値を示し,740Kで最大値を示す。高温引張では脆化温度域が現れる。常温引張では現れない。
4)高温引張におけるビッカース硬さと引張強さの関係は,Sn含有量に関係なく,2本の直線で近似でき,ビッカース硬さ180付近,引張強さ280MPaに変化点が存在する。 
Abstract Elevated temperature and room temperature tension properties of phosphor bronzes containing 4%, 5%, 6%, 7% and 8%Sn, with thickness of 0.3mm are investigated.
Results are as follows;
1) Serration appears at 473-573K on Load-Elongation diagrams for elevated temperature tension test. And the relation has nothing to do with Sn content. Serration does not appear in case of room temperature tension test.
2) Tensile strength does not depend on Sn content above 623K for elevated temperature tension test. Tensile strength depends on Sn content above 723K for room temperature tension test.
3) Reduction of area of Sn 4%, 5%reaches to the minimum at 373K and reaches to the maximum at 750K, and that Sn 7%, 8% reaches to the minimum at 623K and reaches to the maximum at 740K for elevated temperature tension test.
Shortness temperature area does appear in case of elevated temperature tension test. Shortness temperature area does not appear in case of room temperature tension test.
4) There is an inflection point at around 280MPa, HV180 on the curve of relation between elevated temperature tensile strength and Vickers hardness. This relation seems to be represented by two straight lines, and the relation has nothing to do with Sn content.
著者の所属 1)日本ベルパーツ株式会社 2)株式会社原田伸銅所 3)東海大学
Belonging 1)Nippon Bell Parts Co., Ltd. 2)Harada Metal Industry Co., Ltd. 3)Tokai University
Key Words Tensile strength, Reduction of area, Phosphor bronze, Elevated temperature tension test