号数 ばね論文集35(1990)
ページ数 pp. 47−53
種類 論文
論文名 ばね鋼の機械的性質および耐へたり性におよぼす改良オースフォームの効果
Title Effects of Modified Ausforming on Mechanical Properties and Anti-Setting of Spring Steel
著者 伊藤 伸英 ・ 大森 宮次郎 ・ 安達 孝徳
Author Nobuhide ITOH ・ Miyajiro OHMORI ・ Takanori ADACHI
抄録  Mn-Cr系ばね鋼SUP9Aの軟化抵抗、降伏強さ、耐へたり性におよぼすオースフォーム効果について検討した。改良オースフォーム材は860℃から750℃の温度範囲で圧延し、圧延後直ちに油中に焼入れした。この実験では圧下率を30〜50%に変化させた。改良オースフォーム材は、400〜700℃の焼きもどし温度範囲で通常熱処理材に比べ高い軟化抵抗、降伏強さを示した。しかし、伸びは通常熱処理材よりやや低くなった。改良オースフォーム材の耐へたり性は、同じ焼きもどし温度(500℃)または同じ焼きもどし硬度(Hv390)という条件で通常熱処理材に比べ優れている。これらの結果から改良オースフォーム処理は、ばね鋼の性能改善に有効であることがわかった。
Abstract Effects of modified ausforming on the softening resistance to tempering, yield strength and antisetting of Mn-Cr spring steel (SUP9A) have been investigated. The modified-ausformed steel was rolled at a temperature range from 860 to 750℃ and oil quenched immediately after rolling. Rolling reduction was varied from 30 to 50%. The modified-ausformed steel showed surpassing softening resistance to tempering and yield strength in comparison with the conventionally heat treated steel at the whole tempering temperature range from 400 to 700℃, however the percentage elongation of the modified-ausformed specimen was slightly lower than that of the conventionally heat treated one. The antisetting of modified-ausformed steel was superior to that of the conventionally heat treated steel under condition of the same tempering temperature (500℃) or of the same tempered hardness (Hv390). These results have shown that modified ausforming is useful for improvement in properties of spring steel.
著者の所属 茨城大学工学部
Belonging Faculty of Engineering, Ibaraki University
Key Words