号数 ばね論文集31号(1986年)
ページ数 pp.13-21
種類 論文
論文名 任意断面形状コイルばねの応力解析
Title Stress Analysis of Coil Springs with Arbitrary Cross Section
著者 佐藤 雅志・松本 幸夫・斎藤 純幸・森田 国樹
Author Masashi SATO・YukioMATSUMOTO・Noriyuki SAITO・Kuniki MORITA
抄録 多くの研究者によリコイルばねの応力問題についての研究がなされている。 しかし、円形もしくは長方形断面以外の線を使ったコイルばねの応力解析についてはほとんどなされておらず、H.0.Fuchsによる卵形断面についての簡易設計式が提案されているに過ぎない。
 素線が任意断面のコイルばねの解析手法としては、等角写像による方法、有限要素法等が考えられるが、前者では任意断面の写像関数の決定が困難であり、後者は大形コンピュータと構造解析プログラムが必要となるのでコストの高い計算となる。
 本論文では、フーリエ展開境界値平均法による任意断面コイルばねの応力解析法と解析例とを示し、実験結果と比較した。その結果、本解析法によれば、実用上充分な精度で任意断面コイルばねの応力解析ができることが確認された。
Abstract Many studies have been carried out for the Stress problem of coil springs by many investigators. Few analysis, however, have been performed for the coil springs using the wire of noncircular nor rectangular cross section except the egg shaped cross section for which the simplified design formulas are proposed by H.O. Fuchs.
Concerning the analytical methods for the spring with the wire of arbitrary cross section, the conformal mapping method and the finite element method are available. But the former is difficult in determining the mapping function for the arbitrary cross section and the latter is costly for its use of large computers and FEM programs.
In this paper, the 'Fourier expansion collocation method' are presented and the analytical results are compared with the experimental ones. It is clarified that the stress analysis of the coil springs with arbitrary wire cross section can be carried out by the new method with sufficient accuracy for practical use.
著者の所属 村田発條株式会社
Belonging Murata Spring Co., Ltd.
Key Words