号数 ばね論文集30号(1985年)
ページ数 pp.1-10
種類 論文
論文名 高強度炭素鋼オイルテンパー線の諸特性
Title On the Properties of High Strength Oil Tempered Carbon Steel Wire
著者 坪野 秀良・西村 強・藤原 忠義・井岡 博一
Author Hideyoshi TSUBONO ・ Tsuyoshi NISHIMURA ・ Tadayoshi FUJIWARA ・ Hiroichi IOKA
抄録 本報告は、焼入れ、及び焼もどし側ともに高周波誘導加熱装置を装備した新しいタイプのオイルテンパー炉で製造した高強度オイルテンパー線の性能について述べたものである。高強度にするための方法としては、オイルテンパー処理の焼もどし温度を低めることにより行なった。  結果を要約すると以下の通りである。
(1) 本法により製造した195kgf/mm2級の高強度炭素鋼オイルテンパー線は、急速加熱の効果によりオーステナイト結晶粒度が微細であり、良い機械的性質を示す。
(2) 高強度化に伴う利点としては、疲労強度の増大と室温におけるばねの耐へたり性の向上が認められるが、耐熱性は期待できない。
(3) 高強度炭素鋼オイルテンパー線は、低温焼鈍に対する温度感受性が高いので、使用に当たってはコイリング後の低温焼鈍において温度管理が重要となる。
Abstract In this paper, we described the properties of high strength oil tempered wires that were manufactured by the new type furnace equipped with high frequency induction heater. High strength grade wires were obtained for commercial carbon steel and Si-Cr steel by the method of tempering at the low temperature. The test results are as follows:
(1) In this new manufacturing process, wire is heated rapidly to austenitizing temperature and austenite grain size is controlled fine. Therefore, 195kgf/mm2 grade high strength oil tempered carbon steel wire shows good mechanical properties.
(2) High strength oil tempered carbon steel wire shows high fatigue strength and low residual shear strain in the clamping test at room temperature. But, heat resistivity of this wire is less than that of Si-Cr steel oil tempered wire.
(3) The heat sensitivity of high strength oil tempered carbon steel wire is more than that of usual grade wire. Therefore, tempering temperature after coiling must be controlled more severely in the use of this wire.
著者の所属 神鋼鋼線工業(株)坪野 秀良・西村 強・藤原 忠義・井岡 博
Belonging Shinko Wire Co. Ltd.
Key Words