号数 ばね論文集38号(1993年)
ページ数 pp.13−18
種類 論文
論文名 はんだ積層、Sn積層したCu-Ni-Sn合金の機械的性質及び熱処理特性
Title Mechanical Properties and Characteristics after Aging for Cu-Ni-Sn Alloys Coated Tin or Solder
著者 菅原 章1)・西畑 三樹男2)・国井 敏弘3)
Author Akira SUGAWARA 1)・Mikio NISHIHATA 2)・Toshihiro KUNII3)
抄録  工業規模で製造したCu-1.06Ni-0.96Sn-0.079P合金(NB-109合金)に、溶融浸漬により厚さ0.44μmのはんだあるいは、厚さ0.66μmのSnを積層し、また電気めっきにより厚さ1.40μmのSnめっきを施し、これら表面処理材の機械的性質(表面硬度、引張強さ、耐力、伸び、縦弾性係数、ばね限界値、疲労強さ)及び熱処理による特性の変化(耐熱性、成形加工性、応力緩和特性、はんだ付け性)について調査した結果、表面処理の違いによって、機械的性質のうち表面硬度、ばね限界値、疲労強さが、熱処理特性のうち、成形加工性、はんだ付け性において差を生じた。
Abstract  Following our report on the Cu-Ni-Sn Alloys for springs and connectors, we have continued our efforts with this paper, by reporting on the effect of plating and aging on this alloy. It is well known that many copper alloys for springs and connectors are commonly plated with tin or solder, but there is little research about the effects of difference of plating and aging on plating.
 Therefore, we have studied the effect of aging on plated material properties of the Cu-Ni-Sn Alloys.
 The main results are as follows: 
(1) Hardness, spring limit value, and fatigue strength are influenced by the differences of aging treatment on plating material,
(2) Formability, and solderability are influenced by the differences of plating condition.
著者の所属 1)同和鉱業株式会社 2)日本ベルパーツ株式会社 3)アンリツ株式会社
Belonging 1)Dowa Mining Co., Ltd. 2)Nippon Bell Parts Co., Ltd. 3)Anritsu Corporation
Key Words